Elite Kollection — Engineered Hardwood, 9/16″ (Amazon Wood Floors)

Elite Kollection is Amazon Wood Floors’ wide-plank flagship line — European Oak engineered hardwood at 9/16″ total thickness with a 3mm wear layer, milled tongue-and-groove and installable by glue-down, staple/nail-down, or floating. Planks run 9-1/2″ wide and up to 87″ long, in six colors spanning a light blonde through medium beige and light grey to medium brown. Every plank is CARB Phase 2 compliant with a German E-1 adhesive, backed by a 25-Year Residential Finish Warranty, 5-Year Light Commercial Finish Warranty, and Lifetime Structural Warranty. Available to order through our Santa Clara showroom.

Elite Kollection specifications

• Core & thickness: Engineered Hardwood, 9/16″ total
• Species & grade: European Oak (Quercus), A–E (Clear to Rustic)
• Wear layer: 3mm
• Plank size: 9-1/2″ × up to 87″
• Joinery: Tongue-and-groove — glue-down, staple/nail-down, or floating
• Underlayment: None pre-attached — at least 2mm (floating) or 15lb felt paper (staple/nail)
• Waterproof: No — real engineered hardwood, not a waterproof resilient floor
• Warranty: 25-Year Residential Finish / 5-Year Light Commercial Finish; Lifetime Structural
• Certifications: CARB 2 Compliant, German E-1 adhesive formaldehyde standard
• Colors: 6 — light blonde through medium beige and light grey to medium brown

Colors in the Elite Kollection

The six Elite Kollection colors sit in a tight, livable band: Paullo is the lightest, a warm blonde; Bussero, Lissone, and Melzo cover the medium-beige middle; Monza brings a light grey cast; and Rozzano anchors the range at medium brown. It’s a palette built for whole-home consistency rather than dramatic contrast — good for buyers who want one color to work across several rooms.

Best uses for Elite Kollection

• Open-plan living areas — the 9-1/2″ wide, up-to-87″ long plank reads well across large, connected rooms.
• Radiant-heated floors — approved for a properly designed radiant system per NWFA guidance for this European Oak collection.
• Concrete-slab or plywood subfloors — glue-down, staple/nail-down, or floating all apply, so the subfloor type doesn’t rule it out.
• Light-commercial spaces — the 5-Year Light Commercial Finish Warranty extends coverage beyond residential use.

Choosing a color from the Elite Kollection

Paullo and the medium-beige trio (Bussero, Lissone, Melzo) read warmer under incandescent light and pair well with wood or warm-toned cabinetry; Monza’s grey cast suits a cooler, more contemporary room. Bring a sample home or compare it under your own lighting at our Santa Clara showroom, where we can also confirm dye lots across a full order.

Frequently asked questions about the Elite Kollection

Is Elite Kollection approved for radiant heat?

Yes. As a European Oak engineered collection, Elite Kollection is approved for radiant systems designed for engineered wood flooring, following the NWFA Radiant Heat Installation procedure (run the system normally for 21 days before installing, off 24 hours before, then back up gradually over 14 days).

Can I install it myself?

Yes — it’s tongue-and-groove and approved for glue-down, staple/nail-down, or floating. Leave a minimum 1/2″ expansion gap around the perimeter and work from several cartons at once for shade blending.

What subfloor prep does it need?

Acclimate on-site at least 72 hours first. Wood/plywood subfloors should read under 12% moisture (within 4% of the flooring’s own moisture reading); over concrete, use a moisture sealer if emissions exceed 3 lbs per 1,000 sq ft (ASTM F1869 calcium chloride test).

What’s the warranty?

A 25-Year Residential Finish Warranty, 5-Year Light Commercial Finish Warranty, and Lifetime Structural Warranty.

Can I see a sample before ordering?

Yes — Elite Kollection is available to order through our Santa Clara showroom, where you can compare colors in person and we can help confirm dye lots for a full-room order.