REMOVING EXISTING FLOOR COVERING. REMOVING OLD LINOLEUM OR VINYL FLOORS.

Removing Old Linoleum Or Vinyl Floors

You need to be careful when removing old resilient flooring. Many linoleum and vinyl floors from the 1970s and earlier contained asbestos in their backings or adhesives. Various federal, state, and local government agencies have regulations that require special licensed abatement contractors to remove material containing asbestos. Never remove old resilient flooring without having it tested for asbestos first. it is just not worth possible health problems, breaking the law, and contaminating the home.

An alternative to removing old linoleum, vinyl, or any flooring material that possibly contains asbestos is to install a new one over it. This requires that a proper subfloor exists under the resilient floor or that new underlayment has been added. Usually able to verify the presence of the subflooring by looking at a preexisting plumbing hole, loose flooring, or a heating vent or by removing a transition piece. The wood flooring fasteners need to penetrate the resilient-type floor and at least 5/s in. into the actual subfloor material.

If needed, install plywood underlayment over the old resilient flooring. Most manufacturers recommend that a 3/8-in. or thicker underlayment be used. Increasing the height of the floor can sometimes present problems. For example, new wood flooring installed in an existing kitchen usually runs up to the bottom of the cabinets and in front of appliances such as dishwashers or trash compactors. This additional flooring height might make it impossible to remove such appliances for service or replacement. Also, large transitions in height to other rooms can trip an unsuspecting guest.

Types of Flooring Products Available:

Share this post