Deep Forest Collection — 10mm SPC Vinyl Plank (Republic Floor)

The Deep Forest Collection sits at the heavier-duty end of Republic Floor’s SPC lineup, built with a 10mm stone polymer core and a 28 mil wear layer — both above the brand’s typical spec, so it stands up especially well to sustained foot traffic and heavy furniture. Each plank locks together with an angle-drop click system and comes with an attached acoustic EVA underlayment, so installation goes down fast without a separate pad. Planks measure 9″ x 60″ across four colors spanning light brown and medium beige tones, and every plank is genuinely waterproof with no soak-time limit thanks to its SPC core. The line is FloorScore certified and backed by a 50-Year Residential / 10-Year Commercial warranty, and it’s available to order through our Santa Clara showroom.

Deep Forest Collection specifications

• Core & thickness: SPC (Stone Polymer Core), 10mm total
• Wear layer: 28 mil
• Plank size: 9″ x 60″
• Locking: Angle-drop click-lock · Underlayment: pre-attached acoustic EVA pad (additional underlayment not permitted, except a 6-mil moisture barrier over concrete)
• Coverage: 18.7 sq ft/carton · Waterproof: yes, no soak-time limit
• Warranty: 50 Years Residential / 10 Years Commercial
• Certifications: FloorScore
• Colors: 4, light brown through medium beige

Colors in the Deep Forest Collection

The four colors in the Deep Forest Collection split into two warm families — light brown and medium beige — so the range stays cohesive without repeating the same tone twice. Dakota Mahogany and Hurricane Tawny lean into richer, warmer brown tones that read well against darker cabinetry and traditional trim, while Ivory Buff and Light Thunder sit lighter and more neutral, suited to brighter rooms or a more contemporary palette. Because all four share the same 10mm core and 28 mil wear layer, the choice comes down to color and room, not performance.

Best uses for Deep Forest Collection

• High-traffic living areas and hallways — the 10mm core and 28 mil wear layer are built for sustained daily wear.
• Kitchens and bathrooms — the SPC core is genuinely waterproof with no soak-time limit, so spills and splashes are a non-issue.
• Basements and below-grade rooms — rated for above-, on-, and below-grade installation.
• Homes with pets or kids — the heavier 28 mil wear layer resists scuffs and scratches better than a thinner-mil floor.
• Rooms with radiant heat — compatible with hydronic and embedded radiant systems, as long as the floor’s surface temperature stays at or below 85 degrees F.

Choosing a color from the Deep Forest Collection

Lighter colors like Ivory Buff and Light Thunder open up smaller or lower-light rooms and pair well with white or light cabinetry, while the deeper Dakota Mahogany and Hurricane Tawny bring warmth to larger, well-lit spaces and suit darker or wood-tone cabinetry. Because SPC color and sheen can look different under a showroom’s lighting than on a phone screen, bring your cabinet or trim sample and view a full-size plank of each color you’re considering in person at our Santa Clara showroom before ordering.

Frequently asked questions about the Deep Forest Collection

Is the Deep Forest Collection waterproof?

Yes. The SPC (Stone Polymer Core) is genuinely waterproof with no soak-time limit, so it’s a safe choice for kitchens, bathrooms, and other moisture-prone rooms.

Can I install it over radiant heat?

Yes. Deep Forest is compatible with hydronic and embedded radiant systems, provided the floor’s surface temperature never exceeds 85 degrees F.

Do I need to add my own underlayment?

No. Every plank comes with an attached acoustic EVA pad, and additional underlayment is not permitted. The one exception is over a concrete subfloor, where a 6-mil poly vapor barrier is mandatory beneath the planks.

Can I install this myself?

Yes. Deep Forest is a floating floor with an angle-drop click-lock system — no glue or nails — and it installs above, on, or below grade over plywood, OSB, concrete, or an existing fully-adhered hard-surface floor.

How many boxes do I need?

Each carton covers 18.7 square feet. Measure your room’s square footage, add roughly 10% for waste and cuts, then divide by 18.7 to get the carton count — or bring your room dimensions to our Santa Clara showroom and we’ll work it out with you.