Glacier Point Collection — 6mm Waterproof SPC (Republic Floor)

The Glacier Point Collection is Republic Floor’s rigid SPC line built for busy, water-prone rooms, offered in five colors ranging from light greys through a medium beige and a light brown tone. Each plank is 6mm total, built on a genuine stone-polymer core under a 20 mil wear layer, with a factory-attached acoustic EVA underlayment so no separate pad is needed at install. Planks measure 8 31/32″ x 60″ and connect with an angle-drop click-lock system for a tight, floating floor. The line carries FloorScore certification and a 25 Years Residential / 10 Years Commercial warranty, and it’s available to order through our Santa Clara showroom.

Glacier Point Collection specifications

• Core & thickness: SPC (Stone Polymer Core), 6mm total
• Wear layer: 20 mil
• Plank size: 8 31/32″ x 60″
• Locking: Angle-drop click-lock · Underlayment: 1.5mm Bio Guard anti-bacterial acoustic EVA, pre-attached
• Coverage: 25.77 sq ft/carton · Waterproof: yes, 100% waterproof SPC core with no time limit
• Warranty: 25 Years Residential / 10 Years Commercial
• Certifications: FloorScore
• Colors: 5, light grey through medium beige and light brown

Colors in the Glacier Point Collection

The Glacier Point Collection’s five colors move through a compact, coordinated range: light greys for a bright, contemporary base, a medium beige for warmer neutral rooms, and a light brown tone for a softer, wood-look anchor. Because the palette stays tight, it’s easy to match trim, cabinetry, or an adjoining room without sorting through dozens of near-identical options. Every color shares the same 6mm SPC core and 20 mil wear layer, so the finish you pick doesn’t change how the floor performs underfoot.

Best uses for Glacier Point Collection

• Kitchens — the 100% waterproof SPC core shrugs off spills and splashes without swelling or warping
• Bathrooms — the sealed core and attached underlayment stand up to standing water around sinks and tubs
• Basements — rated for above, on, and below-grade installation over concrete
• High-traffic areas — a rigid SPC core and 20 mil wear layer resist scuffs and dents in busy hallways and entries
• Pet households — a dense stone-polymer core holds up to claws and accidents better than laminate or engineered wood
• Open-concept spaces — the same five colors run continuously from kitchen to living area with no transition needed

Choosing a color from the Glacier Point Collection

Lighter tones in the collection open up rooms with limited natural light and pair well with white or light-stained cabinetry, while the light brown option warms up a space and hides everyday dust better than a pale grey. SPC color can read differently under LED versus daylight bulbs, so bring your cabinet or trim sample when you visit our Santa Clara showroom and view the Glacier Point planks under your own lighting before ordering.

Frequently asked questions about the Glacier Point Collection

Is the Glacier Point Collection really waterproof enough for a bathroom?

Yes. The SPC stone-polymer core is 100% waterproof with no time limit, so standing water around a tub or sink won’t swell or warp the plank. Wipe up standing water promptly and use a pH-neutral cleaner to keep the surface looking its best.

Can I install Glacier Point over radiant heat?

Yes, the collection is compatible with hydronic and embedded radiant systems, provided the floor’s surface temperature stays at or below 85 degrees F.

Is this a DIY-friendly floor?

Yes. Planks are a floating angle-drop click-lock floor with no glue or nails. Start left to right, stagger end joints at least 6″, and leave a 1/4″ expansion gap at walls and vertical obstructions.

Do I need a moisture barrier over a concrete subfloor?

Yes, a 6-mil poly vapor barrier is mandatory over concrete on, above, or below grade. The plank’s pad is pre-attached, so no additional underlayment is used beyond that moisture barrier.

How many cartons do I need to order?

Each carton covers 25.77 sq ft. Measure your room’s square footage, divide by 25.77, and add about 10% for cuts and waste. Bring your measurements into our Santa Clara showroom and we’ll help you finalize the order and pull samples of each color.