ECO Ulitmate Silencer Underlayment

To get this price minimum buy 1000 sq feet

100 sq feet per roll

ECO Ulitmate Silencer Underlayment Suitable for floating laminate, engineered and hardwood flooring

Contains ultra•fresh™, an antimicrobial protection that resists mold and mildew

Crushpruf™ technology resists indentation and extends the life of the floor

Provides cushioned comfort under hard laminate flooring

Eliminates minor subfloor imperfections

Offers the industry’s best limited lifetime warranty

Suitable for radiant heat flooring systems

Install ECO Ulitmate Silencer Underlayment with film down against concrete/subfloor

• GREENGUARD Gold Certified.
  GREENGUARD Gold Certification offers stricter certification criteria, considers safety factors to account for sensitive individuals (such as children and the elderly), and ensures that a product is acceptable for use in environments such as schools and healthcare facilities. It is referenced by both The Collaborative for High Performance Schools (CHPS) and the Leadership in Energy and Environmental Design (LEED) Building Rating System.

 

 

The ECO Ulitmate Silencer Underlayment maintains the beauty of your floor like nothing else.
The ECO Ulitmate Silencer Underlayment underlayment can stand up to the pressure. 

ADVANTAGES

ECO Ulitmate Silencer Underlayment is made with 100% post consumer recycled granulated rubber tires.

The moisture barrier film and tape strip combine to lock out moisture and allow for quick and easy installation.

Suitable for floating laminate, engineered and hardwood flooring

Contains ultra•fresh™, an antimicrobial protection that resists mold and mildew

Crushpruf™ technology resists indentation that enables your floors to perform to its fullest potential and last a lifetime

Provides cushioned comfort under hard laminate flooring

Eliminates minor subfloor imperfections

Offers the industry’s best limited lifetime warranty

Suitable for radiant heat flooring systems

Install Eco-Silencer+™ with film down against concrete/subfloor

APPROVED SUBSTRATES

Dry, completely cured concrete (at least 14 days old with HVAC operating)

3/4″ interior plywood or OSB flooring

Waterproofing and crack-isolation membranes

Cement backer units

FLOOR PREPARATION

Subfloor should be clean and dry

In geographic areas where concrete subfloors are subject to excessive moisture, a calcium chloride moisture test is required. Vapor emission readings in excess of 4 lbs. per 1,000 square feet in 24 hrs will require additional protection such as concrete sealant or polyethylene sheeting.

INSTALLATION
Quick and easy installation* – requires no additional seaming tape, cuts with a knife

Install ECO Ulitmate Silencer Underlayment with film DOWN on subfloor

Roll out underlayment with tape strip next to wall. Roll out next row in same manner butting underlayment close to first row ( do not overlap ) and covering the moisture barrier film. Remove the tape strip and secure the overlapping moisture barrier film.

Install flooring according to the manufacturer’s installation instructions
*NOT for glue down installations

 

TECHNICAL DATA
100% Synthetic SBR Rubber foam underlayment blended with post consumer recycled granulated rubber tires, includes attached moisture film
Thickness — .085″
Density — 16 LBS
Weight — 2.24 oz/sq.ft.
Moisture Barrier — with lip and tape sealing system
Antimicrobial Treatment — ultra•fresh™
Thermal Resistance — R-Value .20
Compression Resistance @ 25% — 8.6 psi
Compression Set @ 25% — 10.3%
Flammability Rating — Passes Federal Flammability Standards DOC-FF-1-70
Smoke Density — Passes, 85 max
Product Emissions — Exceeds VOC emissions requirements, environmentally friendly

SOUND ABSORPTION PROPERTIES
Impact Insulation Class (IIC) This method is to measure the impact sound transmission performance of a floor-ceiling assembly (sound transmission through the floor)
IIC – Flooring – Sub-Floor
70 – Laminate/Engineered – 6″ concrete with ceiling assembly
59 – Hardwood – 6″ concrete with ceiling assembly

Sound Transmission Class (STC) This method is to measure the air-borne sound insolating property of a partition element for effectiveness in blocking sound
STC – Flooring – Sub-Floor
71 – Laminate/Engineered – 6″ concrete with ceiling assembly
53 – Hardwood – 6″ concrete with ceiling assembly

ECO Ulitmate Silencer Underlayment LEED Credits
MR 4.1 – 10% recycled content
MR 4.2 – 20% recycled content
MR 5.1 – 10% content manufactured within 500 miles of project
MR 5.2 – 20% content manufactured within 500 miles of project
EQ 4.3 – low emitting VOC’s

ultra•fresh™ is a registered trademark of Thomson Research Associates Inc.